Clik here to view.
NerfingJac Stryfe Flywheel cage
This Flywheel cage is designed for the Stryfe, Rapidstrike or Nerf Cam. The Higher crush cages will provide a higher fps.
View ArticleClik here to view.
Rival Zeus Barrels
These are two barrel replacements that I made for the Nerf Rival Zeus line. I wanted to be able to add a grip to the front of the blaster and that meant that I needed some kind of tactical rail on the...
View ArticleClik here to view.
Nerf Stryfe SelectFire V6 Console on rail
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/eshPjjfkmcm This version is not printed yet. Will print and update soon.
View ArticleClik here to view.
Kronos Slide Priming Grip
A rail attachment for the Kronos slide, it intends to both improve upper slide ergonomics as well as provide an extra stopper for the hand. Tested only on a Worker 14kg spring, though it should handle...
View ArticleClik here to view.
MHP MkII
The long awaited version two of the MHP 15. This isn't just a few tweaks here and there, but a complete remake, with many, many improvements. Some improvements include: -Better ergonomics -Two switch...
View ArticleClik here to view.
"Wild Card" Katana/Talon Adapter
Two detents controlled by a single mag release. Profile accepts both magazine types.
View ArticleClik here to view.
X-Shot Sight (Reflex 6)
I remixed this Nerf compatible sight to work for the X-Shot Reflex 6. As long as the rails are the same on all X-Shot, this sight should work. I made it so that it just snaps on to the rail since it is...
View ArticleClik here to view.
NERF laser adapter for china laser
Able to mount to original nerf guns. Print vertically, the ROUND shape DOWN. The push button is pressed by the hole if you push the china laser keychain inside this part.
View ArticleClik here to view.
Esper - "Gripstrike" Nstrike Stock adapter
CHANGE NOTE 12/01/18 2 - Added "Ayy LMAO" version. CHANGE NOTE 12/01/18 - Made attachment point double-sided so you can attach a stock right-side-up or up-side-down. Loosened fit against the heel of...
View ArticleClik here to view.
Nerf Lock n' Load Trigger
A pop trigger for the Nerf blaster, Lock 'n Load. This will fit directly into the blaster as is.
View ArticleClik here to view.
Caliburn - Stubby Butt
Just on the off-chance that someone wants to use the "GripStrike" with the Caliburn, this should allow that as it deletes the lower portion of the stock assembly. Includes an optional "wrench" you can...
View ArticleClik here to view.
Nerf Logo Magnet
Created this Nerf Logo with two pockets in the back for some 3/16" diameter by 3/16" long magnets. I started with blue filament. Added color changes at 2.4mm (black) 4.2mm (red) 6.2mm (black) and 8.0mm...
View ArticleClik here to view.
Symmetrical NS1 Muzzle Brake for Nerf N Strike Blasters
For more information visit: https://www.thingiverse.com/thing:2349155
View ArticleClik here to view.
Worker Dominator Triple Stage
Built for the Swordfish and 3000KV 2205 Brushless motors .. For more info sit back and relax while you watch the videos :) Download the wiring and config App from...
View ArticleClik here to view.
Drain Blaster Foam Dart Rifle
This is a modification to a "Drain Blaster" drain clearing tool that is available from ebay or Amazon. It uses a a pump to build air-pressure in an integral air tank and then blasts it down the...
View ArticleClik here to view.
Caliburn Display Rack: Shelf-Mounted Clamp-On Brackets
Shelf-Mounted Clamp-On Caliburn Rack Display your custom Caliburn Nerf blaster for all to see with these easy-to-install shelf-mount brackets, designed to cradle your tool of foam-laden destruction in...
View ArticleClik here to view.
Nerf Scope
I made this nerf scope based off of a 4x scope. Scope STL. was put on its side. This model is one print. Sorry about the confusion.
View ArticleClik here to view.
Picatinny to Nerf Tactical Rail (Straight)
Picatinny to Nerf tactical rail used to attach Picatinny attachments to Nerf brand blasters. Amazon Links 6-32 x 1-1/4 Machine Screws - http://a.co/g6WKzqk 6-32 Hex Nut - http://a.co/gyjM7tp I may add...
View ArticleClik here to view.
Nerf Ironsights with flashlight
One might think i took this office warfare thing to far but when the lights are out, you will see who laughs last! This thing fits 2.5mm zip ties. They are 24mm apart from each other. So make sure that...
View ArticleClik here to view.
Esper - Cord Cover Nameplates
Blank nameplates that can be attached to the primary slide grip (or bolt arms). Add text as a cutout or engraving to suit.
View Article