The long awaited version two of the MHP 15. This isn't just a few tweaks here and there, but a complete remake, with many, many improvements.
Some improvements include:
-Better ergonomics
-Two switch support
-35mm solenoid support
-collapsing stock
-streamlined mag release
-multiple foregrip options
-no glue assembly
With my riot cage and wheels, I'm chronoing 125-35, but not seeing a range loss over higher fps full length flywheel blasters.
This uses stryfe size screws (m2.6 self tapping) and a few small compression springs. The auto pusher will also probably need some washer screws to hold the pusher arm down. The iron sights and locks on the stock both use filament as pins for the pivot points on their rotation. The mag release needs a 3/32 pin, but I don't know the size in width at the moment. I might add a small pin that can be printed, or a revised version with an included pin, although that is prone to breaking
I will post all updates outside of the zip files, so if you see a part there, that means it's newer, and probably what you'll want to use. I plan to eventually see about making a Worker Talon compatible version, as well as an ultrystryfe version.
Hopefully I've remembered everything, but if something is off, missing, or you have questions, feel free to leave a comment. If you like what I've done here, consider reading my webcomic http://robbieoflockship.com/ or leaving me a tip.