Clik here to view.
Nerf Afterburner For OFP brute cage
This is an afterburner kit that is designed to use an OFP brute cage so that you can add a single stage flywheel system to any n-strike compatible blaster. The n-strike attachments are modeled after...
View ArticleClik here to view.
Updated Katana Mag
Updated the tolerances on the barrel fit along with fitting it snugly within the front barrel piece of the Kronos. Added a top bit to the Magazine well to fit in the shell better and hold the magazine...
View ArticleClik here to view.
Nerf Stryfe Honey Badger barrel
Quick remix of two files found on Thingiverse. Extended the picatinny rails on the barrel and merged it with the base. 2 versions fused on different ends for a slightly different look. Share your pics...
View ArticleClik here to view.
NERF Vulcan extended ammo box
an extended ammo box for the nerf Vulcan capable of holding up to a 75 dart chain NON REMOVABLE: the ammo box can not be removed by any means (other than disassembly of the blaster) after installation
View ArticleClik here to view.
NERF longshot plunger
A plunger rod for a nerf longshot able to take up to 16kg if you print it well HARDWARE 1 really wide screw (or bolt)
View ArticleClik here to view.
Nerf magnet holster mount
A holster style mount for my magnet holster design just put velcro straps or something threw it and bam a holster HARDWARE...
View ArticleClik here to view.
Nerf Rival XVIII-700 Nozzle
This is a nozzle modification for the Nerf Rival XVIII-700, it fit and clip right in the initial "barrel". Made with Tinkercad. Edit it online https://www.tinkercad.com/things/hZ5lF20WU0y
View ArticleClik here to view.
cPvc speedloader holder
These are files for a Speedloader mount for Modified Nerf blasters. The mounts are designed to friction fit CPVC 1/2" tubes that are available in the US. I designed them to be used with my modified...
View ArticleClik here to view.
Kronos T-pull
T-Pull for Kronos with no need to drill any holes. Friction fits between the two halves of the slide. Note you will need to remove the priming indicator and de-priming switch to fit it in. You also...
View ArticleClik here to view.
Spring Thunder - Singled angled shell mount Molle Clip
This is a molle clip for mounting shells used by the Spring Thunder Shell Ejecting Foam Dart Blaster. The Blaster can be found at my shop here:...
View ArticleClik here to view.
Sight for Nerf Rival
This thing was created for the Nerf Rival Kronos Sorry for the bad pics.
View ArticleClik here to view.
Nerf jolt holster (Reinforced)
Just added some reinforcements to Ozzyozoz04's design. Full credit to the original creator.
View ArticleClik here to view.
Rektify Mk.2
Rektify Mk.2 is a complete redesign of the original Rektify fully-automatic Nerf blaster. Its execution has been thoroughly reconsidered: unnecessary space was cut, the mounting solutions for the grip,...
View ArticleClik here to view.
Re-re-mixed Nerf Sight & dart holder
Took the liberty to remix the design by dingo and finish his work by beveling the alignment blocks on the bottom. This should make the sight removable.
View ArticleClik here to view.
Kronos T-Pull
A remix of the Kronos T-pull by daihau. Changes were made to make it much faster and cleaner when removing supports along with improving the fit in priming indicator hole.
View ArticleClik here to view.
Rapidstrike Trigger
A trigger replacement for the Nerf Rapidstrike. I designed it to be used after modding to hit a microswitch lever because the stock one kept slipping off.
View ArticleClik here to view.
BCNA patch for 3D printing
Optimized for 3D printing, 102 mm across. Different deisgn might be needed for a 2D patch. The logo and QR code is offset 2.5mm above the base for an easier painting experience. Suggestions and...
View ArticleClik here to view.
Expanded Motor Cover for Nerf INFINUS
Due to the design of the Nerf INFINUS' right shell, any motor upgrades that are aligned properly will protrude into the shell, making an expanded motor cover necessary. This cover has been designed to...
View ArticleClik here to view.
Realigned Rayven Flywheel Cage 43mm
THIS IS NOT A STANDARD RAYVEN CAGE. It should not be used unless you have an alignment problem. It might not solve all Rayven alignment issues and you should try a standard OFP cage first. This is a...
View ArticleClik here to view.
Caliburn Variant: Reverse Engineering the SAB
With all the controversy about the SAB vs Caliburn. I wanted to see how different the SAB truly was. Overlaying the SAB concept posted over the original Caliburn cad, I realised the most work went into...
View Article