Clik here to view.
Nerf Mag Bumper (Worker)
These are bumpers to slide onto the bottom of worker nerf mags (only tested with 22's thus far) These are designed to be printed in a soft filament to cushion the mags when they hit the ground, so you...
View ArticleClik here to view.
Nerf Caliburn - VF1 Muzzle Brake
String-free and shorter option compared to the regular SCAR barrel. Performs slightly better with certain spring, barrel, and dart combinations. Secures to the barrel OD using 4-40 screws and hex nuts...
View ArticleClik here to view.
Artifact Rifled Barrels
Threaded Rifled barrel for the nerf artifact kits. Original design by Monochrome Industries. Increase the accuracy of your blaster with a threaded Muzzle for Artifact kits We all know how inaccurate...
View ArticleClik here to view.
Nerf Stryfe Front Tube Adapter
This is a remix of Ultrasonic2's Nerf Stryfe Front Tube Adapter (Part3.stl, the one that fits 19.5mm diameter barrels). In this version I removed the bottom arm to allow use of the stock Nerf rail. Use...
View ArticleClik here to view.
Triple Picatinny Rail
This is a remix of harddrv1's Dual picatinny rail. I extended the length to 10cm and added the third rail on top while retaining the screwports. I raised the middle rail because I was concerned you...
View ArticleClik here to view.
MHP 15 -Mac 10 Variant-
If you prefer how a mac 10 looks, give this a try Internally the same as the other MHP 15, but with different visuals https://www.thingiverse.com/thing:2829145https://www.thingiverse.com/thing:2829154
View ArticleClik here to view.
Nerf Longshot Pump Grip - Remix
This is a remix of https://www.thingiverse.com/thing:1047317 Iv taken the design and repaired a few issues that resulted in triangle holes and filled some gaps that had been missed. Iv also removed the...
View ArticleClik here to view.
Rampage Barrel Adapter
This is a Adapter for the Rampage Nerf to attach a Barrel to it. It is a bit tight, so there may come an update. WARNING! This thing does not support standart nerf Barrels, it is only for...
View ArticleClik here to view.
Nerf Rapidstrike extened pusher
Modeled a Rapidstrike Extended Pusher https://youtu.be/aqZ4PnXLD-4 I used the free software "designspark mechanical" to do these and had included the source files for the model, those file with...
View ArticleClik here to view.
Nerf Stryfe Rapidstrike Flywheel Cage
I designed a new Stryfe/Rapidstrike cage from the ground up. Features include: Maximum rigidity for better crush and lower noise Better containment around the dart for more accuracy and reliability...
View ArticleClik here to view.
Nerf Pyragon Picatinny Grip Attachment [Long ]
Made a thumbhole foregrip roughly based on the Nerf Pyragon grip for picatinny rails. Specifically, this was for f10555 Retaliator grips. This is a longer version of the grip that I previously...
View ArticleClik here to view.
Nerf Stryfe Picatinny Top Rail
Just a simple top rail for the Stryfe. It slides on, snug, and has some very mild tabs to lock into place. It doesn't require any hardware to stay in place (in fact, it's not easy to get off). It's...
View ArticleClik here to view.
Nerf Caliburn - Captive Nut Spreader
Considerably reinforced Spreader with captive hex nut slots.
View ArticleClik here to view.
Nerf Rapidstrike Muzzle Battery Case Lock (one more design)
one more design for the rapidstrike barrel battery lock
View ArticleClik here to view.
Remixed Stryfe Flared Magwell
This is a remix of Flygonial's excellent Stryfe Flared Magwell, which is almost perfect except that its front handgrip area precludes the use of a lot of Stryfe lower front rails, so I've cut down and...
View ArticleClik here to view.
Nerf Absolvers - 3, 4 and 7 shots
These are shotgun absolvers for Nerf darts. They take any 5/8" OD barrel in the front, such as 1/2" ID polycarbonate, 0.509" ID Aluminum or PETG, or CPVC. I have found that loose barrels like 0.527" ID...
View ArticleClik here to view.
Nerf Barrel Attachment Rings
I originally designed these to hold the battery cover of a Rapidstrike in place, but the barrel covers can also be used as an aesthetic part on almost any Nerf barrel attachment point. Note that barrel...
View ArticleClik here to view.
Nerf Rapidstrike 180 Motor Covers
180 motor covers for the Nerf Rapidstrike. And the flywheel one screws in, so you don't have to permanently glue it! A short version for the Rapidpistol is available on my Rapidpistol remix page. If...
View ArticleClik here to view.
Nerf Stryfe Extended Barrel Faux Supressor
This is a suppressor-style barrel extension for the Nerf Stryfe (and presumably other blasters with similar accessory points). There are no moving parts or springs, but the fit is very snug and there...
View ArticleClik here to view.
Spring Thunder - Shell Ejecting Foam Dart Blaster (WIP)
Ayy here's the files. Fab instructions eventually. Full blasters can be commissioned and kits will probably be available after those are gone. Here's some clips of its operation: Loading:...
View Article
