Clik here to view.
A-280 CFE Muzzle for 1/2 PVC pipe
This is a muzzle for an A-280 CFE blaster rifle as seen in Star Wars Rogue One. This is designed to fit on a piece of1/2 inch schedule 40 PVC pipe, which can be used with this adaptor to attach it to...
View ArticleClik here to view.
Pointed and Winged Nerf Dart tips
This is a remix of DoggyDude4's Spinning Nerf Dart Tip. I had to modify his tip to have a wider shaft to firmly fit into the body of the nerf darts. I also did a modified version with just a shaped...
View ArticleClik here to view.
NERF A280-CFE Stock Conversion Kit
Modify the stock that comes with your Rogue One Captain Andor Deluxe Blaster (aka the NERF Raider Stock) into something a little more screen accurate. This is designed to work with the stock extended...
View ArticleClik here to view.
Short NERF magazine for cosplay.
This NERF magazine can be used if you need something a little more aesthetically pleasing and short for cosplay or display purposes. This is simply meant to be a display piece, not a functioning NERF...
View ArticleClik here to view.
Stryfe "The Block" Kit
A simple stryfe front attachment set. turns your stryfe into a block that shoots darts xD Extended Mag release Lever is smooth and buttery for all your buttery needs. Glued on Motor covers for the NERF...
View ArticleClik here to view.
Double magazine holder with belt loop
Just a basic remix of mjterry03's double magazine holder. I absolutely loved the the fit on the original file, but I figured that the provided belt clip wouldn't work for my style of play. So, I added...
View ArticleClik here to view.
Basic Stryfe Mockup
In working on cosmetic parts, I found I needed a model of the stryfe to work with... so I'm sharing it here too. It's a symmetric one, so no motor or battery parts are modeled in, and the actual stryfe...
View ArticleClik here to view.
Kronos Clip (5 and 6 shot and lefty variants)
Edit: added 6 shot and lefty variants A Clip for the Nerf Kronos. Designed to friction fit in the top loading gate and automatically pop out when the slide closes. low retention designed for official...
View ArticleClik here to view.
Nerf Muzzle Brake #30
Muzzle brake for Nerf blasters (19mm tube) Credits for the original design: https://www.artstation.com/rzeng
View ArticleClik here to view.
Nerf Longshot Pump Grip Rail for Worker F10555
This is a picatinny rail for the side rails on the Worker Pump Grip Kit (F10555) for the Nerf Longshot. I would suggest that you print with 100% infill to ensure your attachments stay put while running...
View ArticleClik here to view.
Experimental Nerf Rival Box Mag Feeding Mechanism
This is my feeding mechanism for a homemade rival box mag. It isn't perfect, but I haven't had the time to tune it. Hopefully this will help advance the development of large-capacity rival blasters....
View ArticleClik here to view.
Nerf Hammershot rear cylinder peg
A friend managed to lose the peg supporting the cylinder of his Nerf Hammershot, causing occasional misalignments. This takes care of that. I modelled it after the original part from my own Hammershot....
View ArticleClik here to view.
Struckbow: Homeade Nerf Blaster- 3D Printed Parts
These are all the parts that need to be 3D Printed in my custom designed blaster, the StruckBow. For more information and a full assembly writeup refer to this NerfHaven post:...
View ArticleClik here to view.
Nerf Scope
Make sure you guys like this thing and use it, i have not printed it yet though. Umm please download this and feel free to edit it mah doods.
View ArticleClik here to view.
1.5 inch PVC to Nerf adaptor
This is an adapter that will allow you to attach a 1.5 inch schedule 40 PVC pipe to a nerf gun. It should work with the Star Wars Jyn Erso Nerf blaster as well as the Cassian Andor sniper blaster.
View ArticleClik here to view.
FDL-2X (Arduino)
This is an adaption of the famous FDL-2X Nerf gun, operated by an arduino pro mini. Arduino is much cheaper, easier to get and easier to program for the most of us. As there was no documentation on the...
View ArticleClik here to view.
InventionTool5000
The InventionTool5000, created and named by five year old Cameron Haight, is a tool meant to be used to help people who either were born without/lost a hand and/or fingers, or who don't have use/only...
View ArticleClik here to view.
Nerf Muzzle Cover
A simple Nerf muzzle attachment for standard N-Strike barell attachment points. It can be used to give the muzzle a different look and doubles as a lock for the Rapidstrike battery cover.
View ArticleClik here to view.
Tactical Strike Ammunition Reservoir Extension
This is an ammunition reservoir extension for the Tactical Strike (Adventure Force). It is like a Nerf gun except that the ammunition are balls.
View ArticleClik here to view.