Clik here to view.
Nerf Stryfe Jam Door with 40mm Fan Mount
Ever wanted a cooling solution that just works, and stays out of the way? Well, here you go. Designed to fit a 40mm fan and the Nerf Stryfe, this jam door will help keep your whole blaster cool. To...
View ArticleClik here to view.
Brass Barrel Adjustable BoomCo Clip/Qwikclip
A printable BoomCo clip that uses brass barrels and allows for an adjustable capacity. This is untested and may not work as intended! This needs brass barrels in order to work. I have included the...
View ArticleClik here to view.
NERF Vulcan Tripod Magazine Mount
Do you need a simple, easy to use system to use almost any mag-fed NERF blaster with a Vulcan tripod? If so, this is the 3D print for you! This is a magazine stand for a Nerf Vulcan tripod. Intended to...
View ArticleClik here to view.
Nerf rival apollo stock
This is a Nerf rival Apollo xv-700 stock. I wanted a stock for my Apollo but couldn't find any files. there were 3-d printed ones already but i'm not paying 10 dollars for one. So I made one.
View ArticleClik here to view.
Hammershot_8_spinner_modified
I tried the original and to be fair it was untested at the time. So I made this as the rest of the parts were great! This did the trick and worked as my son said "flawlessly". I think he was a bit...
View ArticleClik here to view.
Nerf Sledgefire Single Shell
Versions for 16mm (Conduit/Artifact barrel),14.5mm (PETG, Brass?), and 0.625in for 1/2in PVC. Print with a few perimeters and drill out to size if needed. This is the shell I designed when I was...
View ArticleClik here to view.
Nerf Modulus Mk2 Flared Mag Well
This is a flared mag well for the Modulus Mk2 Recon second version. It speeds up your reload by allowing you to be a bit less accurate when you go to insert the magazine. May not be compatible with all...
View ArticleClik here to view.
Longstrike Full Length Picatinny Rail
This is a single piece full length rail for the Longstrike barrel extension. It is designed to also be compatible with the Gavinfuzzy rails. You will need to trim off a fair amount of the detail of the...
View ArticleClik here to view.
Nerf Modulus Mk2 Picatinny Rail
This is a Picatinny rail set for the Modulus Mk2 Recon. Compatiable with Gavinfuzzy Retaliator barrel attachment front rail. Print then glue with epoxy or Gorilla Glue (recommended for PLA). BE SURE TO...
View ArticleClik here to view.
Nerf Titan Barrel Adapter
This is a threaded adapter for the Nerf titan for single barrels and coupler attachments. Print inverted. Sizes available to fit barrels of 16mm, 20mm, 25mm diameter and 3/4 PVC (1.05in). Seen here on...
View ArticleClik here to view.
Enhanced Magazine for Blaster for 13.5mm Darts
When I first printed the magazine, I felt that 6 darts just isnt enough, am average Nerf gun holds at least 11 in one magazine, AND is able to feed in any orientation. Which prompted me to take the...
View ArticleClik here to view.
Folding Stock Mod For Blaster For 13.5mm Darts
Just a Hinge system for the blaster, Allows the stock to fold off to the right side of the gun. Uses just a tad more threaded rod for the hinge, but I had extra from cutting the lengths. Requires 8...
View ArticleClik here to view.
Nerf Stryfe Pusher
Nerf Stryfe Pusher. This is a pusher for the nerf Stryfe. It is meant to be a drop in of the stock pusher. This has not been tested by me personally, and I expect that it will require some lubrication...
View ArticleClik here to view.
Ultimate Cooling Modulus Cage Covers
I am the one who designed the Trilobite cage, and people wanted covers for it. Problem is, the Trilobite cage needs a lot of airflow for cooling that it normally generates by itself, but when covers...
View ArticleClik here to view.
Nerf Female Stock Attachment Point
Note: Picture is a rendering of a practical use of the point, not just the point itself. This is a female stock attachment point for Nerf blasters. It mounts onto the rest of a stock or whatever you...
View ArticleClik here to view.
Nerf Recon MkII bracket
A pair of bracket to fix a Recon MkII on a wall. Not printed yet, I will post pics when it's done ;-) It is designed to be fixed with M4 CHC screws. The screw head remains inside the bracket.
View ArticleClik here to view.
Nerf Target with stand
This was made from the "Nerf Target" by stumphopper (http://www.thingiverse.com/thing:149606). I added a base to hold the revolving target. I added some length to the pegs of the target to have more...
View ArticleClik here to view.
Zeus Box mag feed(not done)
LE FILES,,... No it is not perfect but i am woirking on it....
View ArticleClik here to view.
Nerf & Airsoft Landmine (Safe & Fun with Flour or Baby Powder Explosions!)
This is a safe and fun 3D printed landmine for use at your next Nerf or Airsoft war! You'll need the following to complete the build: 1x Madbull Airsoft Shotun Shell 2x 3/8"x1-1/8" (10x29x1mm)...
View Article