Clik here to view.
130/180-size Motor Endbell Cap
This is used to provide strain relief for wires on 130 and 180-size motors, particularly for my Nerf tricage, since motor endbells are facing out into open space, and it is common for wires to become...
View ArticleClik here to view.
Nerf Sledgefire Shell holder
This is a Nerf Sledgefire three round shotgun shell holder for all tactical rails, use if you have removed the stock, or want to be a pimp with infinite reloads, tacticool style. I recommend sanding...
View ArticleClik here to view.
Nerf 12-Dart Super Grenade (Uses CO2/GreenGas)
This is a 3D printable, plunger-activated, 12-dart, Nerf grenade. To complete the build, you'll need the 3D printed parts and: (1) M4x5mm hex head screw, (1) Army Force 72rd 40mm airsoft grenade, the...
View ArticleClik here to view.
Untested (!) microswitch bracket
This in an untested - yes, untested, and I don't have easy access to a printer - mounting bracket for a microswitch in the V-series form factor, which is an industry standard. (You might be used to...
View ArticleClik here to view.
Nerf Stryfe AutoPusher
ATTENTION: you need the AutoStryfe V2 mod kit by kitsune109 to use this thing! I love the AutoStryfe mod by kitsune109 (THANKS!) but I didn't managed it to tighten the gear to the pusher arm without...
View ArticleClik here to view.
Nerf LongStrike CS-6 Suppressor
This is s toy suppressor for the Nerf Longstrike CS-6. I modelled four "springs" inside the barrel to lock it into the toy's barrel.
View ArticleClik here to view.
Nerf Scope
I did some small edits to the original nerf scope by MartijnRoozendaal (linked as the remixed item), to be easier to print, and better fit my Nerf Longstrike CS-6 specifically. I printed the pieces...
View ArticleClik here to view.
Nerf Stryfe Microswitch Trigger
Yo, I built the AutoStryfe mod kit by kitsune109(/thing:2245550) and wanted to have a nice pistol trigger and some more space for the microswitch. So I took the Nerf Stryfe Trigger V1 by bkbstar21,...
View ArticleClik here to view.
Blasterforge Stock 2
Latest stock design use m4 nut and bolt to secure the shoulder rest in place
View ArticleClik here to view.
Nerf Desolator Jam Door with 40mm Fan Mount
Ever wanted an easy cooling solution for your Nerf Desolator that just plain works? Well, here you go. Hook it up to the rev trigger or put it on a separate switch, this fan mount will help to keep...
View ArticleClik here to view.
Minimalist Aesthetic Modulus Stock Reinforcement
I looked at these stock reinforcement pieces and said, "these are big blocks. I want to keep the gap there, but still reinforce the stock." I went on to design this, an aesthetically pleasing,...
View ArticleClik here to view.
Nerf Stryfe Jam Door with 40mm Fan Mount
Ever wanted a cooling solution that just works, and stays out of the way? Well, here you go. Designed to fit a 40mm fan and the Nerf Stryfe, this jam door will help keep your whole blaster cool. To...
View ArticleClik here to view.
Brass Barrel Adjustable BoomCo Clip/Qwikclip
A printable BoomCo clip that uses brass barrels and allows for an adjustable capacity. This is untested and may not work as intended! This needs brass barrels in order to work. I have included the...
View ArticleClik here to view.
NERF Vulcan Tripod Magazine Mount
Do you need a simple, easy to use system to use almost any mag-fed NERF blaster with a Vulcan tripod? If so, this is the 3D print for you! This is a magazine stand for a Nerf Vulcan tripod. Intended to...
View ArticleClik here to view.
Nerf rival apollo stock
This is a Nerf rival Apollo xv-700 stock. I wanted a stock for my Apollo but couldn't find any files. there were 3-d printed ones already but i'm not paying 10 dollars for one. So I made one.
View ArticleClik here to view.
Hammershot_8_spinner_modified
I tried the original and to be fair it was untested at the time. So I made this as the rest of the parts were great! This did the trick and worked as my son said "flawlessly". I think he was a bit...
View ArticleClik here to view.
Nerf Sledgefire Single Shell
Versions for 16mm (Conduit/Artifact barrel),14.5mm (PETG, Brass?), and 0.625in for 1/2in PVC. Print with a few perimeters and drill out to size if needed. This is the shell I designed when I was...
View ArticleClik here to view.
Nerf Modulus Mk2 Flared Mag Well
This is a flared mag well for the Modulus Mk2 Recon second version. It speeds up your reload by allowing you to be a bit less accurate when you go to insert the magazine. May not be compatible with all...
View ArticleClik here to view.
Longstrike Full Length Picatinny Rail
This is a single piece full length rail for the Longstrike barrel extension. It is designed to also be compatible with the Gavinfuzzy rails. You will need to trim off a fair amount of the detail of the...
View ArticleClik here to view.
Nerf Modulus Mk2 Picatinny Rail
This is a Picatinny rail set for the Modulus Mk2 Recon. Compatiable with Gavinfuzzy Retaliator barrel attachment front rail. Print then glue with epoxy or Gorilla Glue (recommended for PLA). BE SURE TO...
View Article