Clik here to view.
Nerf technical(RC controlled)
Roughly a week of development for this one and probably around 6 less successful prints, this is what came of it! You hook it up to a receiver and use it as a standalone turret och put it on a RC...
View ArticleClik here to view.
Blaster for 13.5mm foam darts (like Nerf darts)
https://youtu.be/T97seDFbOkE This blaster is a truly working and very nice shooting riffle to fire nerf compatible foam darts. It works as a semi automatic A.R. style rifle and It is mostly printed,...
View ArticleClik here to view.
Nerf Tactical Rail mount for Mini Maglite flashlight
https://www.tinkercad.com/things/4NA3S0qNgZH I made a nerf tactical mount for a mini-maglite. Enjoy!!!
View ArticleClik here to view.
Nerf Stryfe Barrel Shell
This a barrel extension for the stryfe that has no actual barrel. I will only give it a different look, there is no inner barrel. Please note this is a work in progress. As of now, 9/26/16, I have not...
View ArticleClik here to view.
Clik here to view.
Nerf Flat-Top Adapter
This was made at the request of a friend. He needed a flat-top adapter for his nerf gun so that he could glue something to it and attach it to his gun. The dimensions in the "Nerf_FlatTop_Adapter.step"...
View ArticleClik here to view.
Nerf Crossbow PT blocks
Blocks for a 32mm PT replacement Print two body blocks and 1 plunger guide blocks. Designed for 32mm conduit and up to 12mm square nylon rod plunger rod material. Glue in place on plunger tube to sit...
View ArticleClik here to view.
JT Splatmaster Z100 Endcap
Replacement endcap for the JT Splatmaster Z100 paintball pistol. A dog chewed on my mates Z100 endcap so I modelled this part to replace it. It was built over a few iterations as I did not have the...
View ArticleClik here to view.
AmmoCounter V1 Bumper Set
Protect your AmmoCounter V1 kit with these custom bumpers for the PCB and Arduino Pro Mini. Learn more at http://ammocounter.com Suggested Print: .2mm layers at 35% infill with supports on.
View ArticleBoomCo BreakFlip Nerf stock attachment point
HAS NOT BEEN TESTED! Nerf stock attachment point to use in place of the stock included with the blaster. Both this and the original stock are non-removable without opening the blaster. Complete...
View ArticleClik here to view.
Nerf Connector MasterKey Piece RougCut to LongStrike Barrel Attachment
Just print, slide and go. Hammering will be required, and the pieceshave specific sides, so think before hammering. Otherwise, enjoy!!
View ArticleClik here to view.
BoomCo CrankForce Slamfire Lock
WIP - Never tested This a piece to use in place of the handle and trigger that would allow slamfire-only (the blaster will fire as soon as it is primed)
View ArticleClik here to view.
Nerf Modulus ECS-10 Rifle Wall Mount
A custom wall mount for a Nerf Modulus ECS-10 blaster. There are two parts to each bracket, the mounting plate and the hook itself, so as to avoid needing supports. On my printer I needed to scale the...
View ArticleClik here to view.
Stryfe Upgraded Mag Release
This is a modified version of DFrostedWang's stryfe release, this one optimized for the least motion of the mag release finger. It is also more comfortable, reducing the irritation it could cause...
View ArticleClik here to view.
StryfeLight Module Versions 1 and 2
This module will house a 750-lumens Philips light bulb from the Home depot. These bulbs run off 12 volts, and in my case I am using a 3S LiPo battery. The Wiring must be rigged up on the stryfe so that...
View ArticleClik here to view.
Universal 5- Shot Absolver
This barrel will allow you attach the flat rear 2" to PVC or CPVC to make a 5 shot absolver barrel.
View ArticleClik here to view.
Nerf Stryfe Mag Release
Alternate short magazine release for the Nerf Stryfe. Tested to work on the Stryfe.
View ArticleClik here to view.
Nerf Firestrike 17/32" Brass Barrel Adapter
Drop-in adapter that allows a 17/32" brass barrel to be inserted into the blaster without destroying the stock barrel. Tested to work on a Firestrike. NOTE: The tabs holding the barrel to the plunger...
View ArticleClik here to view.
Nerf Retaliator Extended Trigger
Removes the wiggle room from before the trigger touches the catch, resulting in a shorter and cleaner trigger pull. Otherwise identical to the stock trigger. Tested to work on Retaliator and Recon.
View ArticleClik here to view.
tribarrel with barrel stops
So i downloaded the files for the original, and wasnt happy when my barrels kept falling out on the back. So i took the orange stop from the original back plate and added it into the new file. Now the...
View Article
