Clik here to view.
Nerf Retaliator Trigger Spacers
Nerf Retaliator Trigger Spacers These Spacers Shorten the trigger pull distance of the Retaliator. Makes the Trigger Pull more responsive. Attach using Epoxy. Post Printing: there is a .5mm Support...
View ArticleClik here to view.
Clik here to view.
The Tacker - Talon mag for The Pigeon Mk8
I recently made a Pigeon Mk8 with a Talon frame that does not fit a Packer magazine. so I designed the Tacker (Talon + Pecker) which has not been tested yet but teoretically it fits. so some...
View ArticleClik here to view.
Trilogy Shell Holder
A holder for your Nerf Trilogy shells. I printed 10 of them and realized I needed some way to hold them on my blaster.. I ended up velcroing 2 of these onto the side, so they are easily removable. Keep...
View ArticleClik here to view.
Nerf Rival - Perses - Vertical Front Grip
This vertical front grip was designed for the Nerf Rival Perses. The design includes provisions for an M3 bolt and nut to secure the grip in place. However, in my experience, the fit is secure enough...
View ArticleClik here to view.
Cap for Nerf Rival Perses Hopper
This cap was designed to be compatible with Memoire's Perses Hopper design (found here:https://www.thingiverse.com/thing:3991277). This design utilizes an M3 bolt and nut to clamp the cap ring onto the...
View ArticleClik here to view.
Clik here to view.
NERF Firestrike Muzzle Brake
This is a simple "muzzle brake" for the Nerf Firestrike. Designed to a tight fit over the original muzzle, can be glued if needed. The small flat goes to the bottom to clear the "laser" lens. Designed...
View ArticleClik here to view.
Nerf Talon Claw / Caliburn muzzle brake
Muzzle brake for Talon Claw or Caliburn. You might want to print a short piece first to check the fit on your barrel. You can resize it from there.
View ArticleClik here to view.
Nerf Rival Angled Front Grip (AFG)
This is an Angled Front Grip compatible with Nerf Rival rails. Pictured installed on a Nerf Rival Perses.
View ArticleClik here to view.
Nerf Barrel
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5janBSABbkF
View ArticleClik here to view.
Calburn U - "DonutGrip" horizontal foregrip
OGDonutGrip - Original custom foregrip CaptainSlug was awesome enough to make for me on a whim. DonutGrip_Tuned - My edits to the foregrip based off mostly preference and a bit of considerations for...
View ArticleClik here to view.
Kronos Barrel Shroud
Designed to hide about 8 inches of brass barrel for a singled kronos. Extrapolated from (CyanAce's custom Kronos Front Piece). Leaves a slight gap between the front piece and the stock rail, I ended up...
View ArticleClik here to view.
Nerf Vulcan shell links (cartridge-style.) HARDWARE REQ.
These are printable replacement shells for the Nerf Vulcan. To make links, you will need plenty of 1/8" dowel rod, a small hammer and a punch. The "shell anvil" included is to slot together two shells...
View ArticleClik here to view.
Zuru X-Shot Chaos Meteor - Front Plate and Muzzle
The whole piece consists of 2 parts that you have to glue together. At best do it while the inner part is assembled to avoid any missalaign issues. The supports are neede only for the inner plate, just...
View ArticleClik here to view.
Clik here to view.
Stryfe PDW Stock & Foregrip
PDW stock with a friction fit on the Nerf Stryfe. Use 1/8"x3/4" aluminium bar as support bars for the stock. Aluminium bars may require sanding to fit in to slots. The short foregrip can only be fitted...
View ArticleClik here to view.
Nerf Vulcan Replacement gear
this isn't so much my model, as it's from a friend who helped me by designing a replacement part for mine. He handed me one that worked, but when i printed it it was a little off (my printer at the...
View ArticleClik here to view.
Nerf Trophy
This is a nerf trophy I designed for nerf wars. The plaque on the front is customizable for different games. I used mine for duos. Please comment if you have any problems or ideas to make it better.
View Article