Clik here to view.
Nerf Mega Megalodon Alternate Drums
These are alternate drums for the Nerf Mega Megalodon Drums included are -Rival, fires one two or three rival rounds per shot -Triple, fires three full length elite darts per shot To assemble the drum...
View ArticleClik here to view.
Caliburn - Muzzle6 Test
Test that uses two 4-40 x 3/8 flat head screws for a two-piece shaft collar clamp onto the barrel.
View ArticleClik here to view.
Solenoid housing for Rapidstrike
Currently working on another rapidstrike mode with solenoid. This is a solenoid bracket I came up with. parts can be printed without support. https://youtu.be/EsnAoejyvKs
View ArticleClik here to view.
Caliburn Carbine - Requested Uppers
"Alt" Moves the hex nut slots and barrel to the full-length front-half assembly locations. "AltK" is for Katana mags only.
View ArticleClik here to view.
Adventure Force Savage Spin Flywheel Cage
Flywheel cages for the Savage Spin. Use with aftermarket motors and flywheels for better blaster performance after a proper rewiring. Daybreak wheel might fit in the blaster, but require trimming the...
View ArticleClik here to view.
Nerf Rival Ball Catapult / Onager / Mangonel
I printed the Hallway Seej set and while the idea is absolutely fantastic the model didn't fit at all for me. It had way to loose tolerances. Furthermore even with the largest stopper it shot way to...
View ArticleClik here to view.
Chimera Mk6 Extra Beefy Front Plate
The Chimera is an awesome blaster, but the Mk6 front plate doesn't have much material for the bottom threaded rods to mate with. I beefed up the front plate all around, making the sides wider and the...
View ArticleClik here to view.
Hotkoin's Oyumi Bungee Blaster
Created as a mix of those two designs by the talented u/Hotkoin;...
View ArticleClik here to view.
Nerf Flipfury Fliper Case
This is an adapter for a Nerf Flipfury, i got my hands on a brocken one. Someone "overused" the flip function and broke the case for the flipping and rotating function. This should work on all devices...
View ArticleClik here to view.
Cowabunga! Foam Dart Blaster
This is Cowabunga! A Foam blaster designed for short dart (Talon) systems. The key feature of this design is the fact that it uses a smaller solenoid than most other solenoid builds. The Solenoid I...
View ArticleClik here to view.
Nerf Keychain / Charms
A few Charms/ Keychains I designed of some nerf darts. Multi Color and single color versions included.
View ArticleClik here to view.
TalonClaw AFG Tigther tolerances
A tighter fit on the rail, reduced pretty much all of the side to side wobble
View ArticleClik here to view.
Clik here to view.
Clik here to view.
Clik here to view.
MEGA Caliburn - Muzzle3 test
Testing an alternate barrel retention setup, and removing the need for any external hex nuts for retaining the Trench.
View ArticleClik here to view.
Rival Caliburn - Muzzle2 test
Removed vestigal features that waste print time. Trench now attaches with a 4-40 screw.
View ArticleClik here to view.
short dart cutter with raser holder x6
this is a dart cutter to cut full lengths to half lengths it cuts 6 darts and can hold a razor.
View ArticleClik here to view.