This is a WIP and as such, I have included a STEP file for people to alter it to fit their needs for NON-COMMERCIAL use.
This design used a base design from user Striller on the /r/nerf Discord for basic measurements, but the design was completely re-worked for better mag retention and optimized for printing. Prints without support as long as your printer has adequate cooling. Print with 3 shells for optimal strength. Should be compatible with molle vests. I used these Molle Bands to hold them to my gear: https://www.thingiverse.com/thing:2235003
I've run these in a few wars now, and they work well enough. The retention clip requires some sanding to function smoothly, or just push and pull your mags out repeatedly to smooth the tooth down. Mags will be retained in either direction. These will likely not be sold through FoamBlastShop.com
Legal Mumbo Jumbo: Please observe the non-commercial license. I reserve the right to not enforce the license as I see fit. I will not enforce the non-commercial clause of the license in instances where an individual pays a third party to print this item through a print service for personal use (ex. Using 3d Hubs). Any individual or company who has not licensed this design through me for commercial use may only receive compensation for three of these items annually. I will not enforce the non-commercial clause of the license in instance where an individual sells a blaster that has this item on it as long as the individual does not sell more than three blasters a year with this item installed or bundled with the sale. I reserve the right to sell this item myself or license to 3rd party companies interested in selling it (contact me if you do).