FDL-2 Muzzle for AmmoCounter IR Beam

Connect your AmmoCounter to your FDL-2, FDL-2X or FDL-2V!

Works great with the Universal Kit V3.0 -Available at AmmoCounter.com

FDL-2 and FLD-2X Installation:

1. Download the fdl-2x-ir.stl and print.
2. Route the IR lead through opening in the top of the muzzle and install the AmmoCounter IR beam.
3. Remove the 2 screws in front of the barrel cap.
4. Push the muzzle on to the front of the blaster.
5. Replace the 2 screws in front of the barrel cap.

FDL-2V Installation

*Note this installation requires 2 screws similar to the ones used on your FDL.

1. Download the fdl-2V-ir.stl and print.
2. Route the IR lead through opening in the top of the muzzle and install the AmmoCounter IR beam.
3. Push the muzzle on to the front of the blaster. (You may have to adjust your picatinny/foregrip)
4. Add 2 screws to the holes in the top of the main barrel.

FDL-2 on Thingiverse